In short. UKCA is the UK's product conformity marking for Great Britain. For many products the UK still recognises the CE marking, alongside or instead of UKCA, so EU manufacturers can often keep using CE. But rules differ by sector, and every product sold in Great Britain needs a UK-based importer whose details travel with it.

After Brexit, UKCA marking became one of the most feared acronyms for European manufacturers. The good news is that for many products the situation is simpler than it was a few years ago. The bad news is that "simpler" does not mean "the same for everyone". Here is what an EU manufacturer needs to check before shipping to Great Britain.

What is the UKCA marking?

UKCA stands for UK Conformity Assessed. Like the CE marking, it shows that the manufacturer believes the product meets the relevant requirements. The UKCA and CE regimes cover more than 20 product types, including the goods known in the EU as "new approach" goods, such as machinery, toys, electrical equipment and personal protective equipment (GOV.UK, placing UKCA or CE marked products on the market in Great Britain).

It applies to Great Britain: England, Scotland and Wales. Northern Ireland follows different rules, and the UKCA marking does not apply in the Crown Dependencies such as Jersey or the Isle of Man.

Can I still use the CE marking in Great Britain?

For many products, yes. GOV.UK explains that where UK requirements meet its needs, the UK continues to recognise the CE marking, alongside or in place of UKCA, for the Great Britain market under the Product Safety and Metrology (Amendment) Regulations 2024 (GOV.UK). This gives businesses flexibility on which conformity process to use.

In practice, many Italian and European manufacturers already selling in the EU can keep their CE marking for Great Britain. A product can also carry both markings, as long as it complies with the requirements behind each one.

Which products need extra checks?

Not every sector works the same way. GOV.UK points to sector-specific product regulations and lists areas with their own rules, such as construction products, medical devices, marine equipment, rail products and transportable pressure equipment. Some products also use other markings, such as the reversed epsilon on aerosols or the Wheelmark on marine equipment (GOV.UK).

Here is a simple way to sort your product:

Situation What it usually means What to do
Your product is CE marked under a regime the UK still recognises CE can be used in Great Britain Confirm it in the sector guidance for your product
Your product is in a sector with its own rules (for example medical devices or construction products) Deadlines and requirements may differ Read the sector guidance and talk to a specialist
Your product needs no conformity marking at all No UKCA or CE required Check general product safety and labelling rules
You sell into Northern Ireland too Different rules apply Use the Northern Ireland guidance

What does the UK importer have to do?

Whichever marking you use, someone in the UK has legal duties. GOV.UK defines the importer as a business established in the UK that supplies a product from outside the UK. Its responsibilities include putting its own name and address on the product, checking that the manufacturer has done the conformity work and kept the technical documentation, and cooperating with market surveillance authorities (GOV.UK).

There is a transitional rule that helps EU exporters: for products imported from an EEA state (and in some cases Switzerland) before 11pm on 31 December 2027, the importer's details can go on an accompanying document or on the packaging instead of on the product itself.

This is why a serious UK distributor, who is often also the importer, will look at your markings and documentation before talking about volumes. We explain what else they check in our guide on how to find a distributor in the UK.

Can I self-certify, or do I need a UK approved body?

It depends on the product. Under several UK regulations the manufacturer can self-declare conformity: for example, all products under the Electrical Equipment (Safety) Regulations 2016 and the Electromagnetic Compatibility Regulations 2016, and most machinery outside the higher-risk list (GOV.UK). Higher-risk products need a third-party conformity assessment.

Either way, you need the technical documentation and a declaration of conformity, and you must keep them for the period set by the product regulations.

What should an Italian manufacturer do before shipping?

  1. Find your product in the sector guidance on GOV.UK and check whether CE is accepted for it in Great Britain.
  2. Check your declaration of conformity and technical file are complete and in English.
  3. Agree with your UK importer who puts which details where, and plan for the end of the packaging option on 31 December 2027.
  4. Check labels and instructions for British English and UK addresses.
  5. Don't forget the other rules: customs, labelling and, for food, the SPS rules we cover in our update on the UK-EU SPS agreement.

Getting product compliance wrong is one of the five mistakes Italian companies make in the UK. This article is general information, not legal or technical advice: for your product, confirm the rules with a compliance specialist or your trade association.

Frequently asked questions

Is the UKCA marking mandatory?

Not for every product. For many goods the UK still accepts CE marking in Great Britain, and some products need no conformity marking at all. Check the sector guidance for your product.

Can a product carry both UKCA and CE?

Yes. GOV.UK confirms a product can carry several markings, including UKCA and CE, as long as it complies with the relevant requirements for each.

Do I need a UK company to sell CE-marked products in Great Britain?

Not necessarily, but you need a UK-based importer. Often this is your distributor. If you plan to import yourself, a UK presence may make sense: see how to set up a UK company.

Does UKCA apply in Northern Ireland?

Northern Ireland follows different rules, generally based on CE marking. Products sold there need their own check.

Product rules are one piece of the market entry plan we build with Italian manufacturers through our UK Market Entry service.

Nicholas Perpiglia

Founder of Perpi Ltd. Formerly at Sony Europe, now helping SMEs, startups and Italian businesses grow in the UK.

Author profile

All articles